When you look for this answer, many pages on google you searched out may give you lots of data, and official explanation about the definition of stepper motor, servo motor, torque, terminology
A relief sculpture is a marvelous piece of art to witness. The detailing and expressive image evokes admiration and reverence when used in religion.
Corbels have been around for centuries. Even before medieval times the use of corbels as supports was standard fitment in most homes.
The OMNI CNC router is a fine example of turning materials on a router. The process is very simple. A rotary device works a s 4th axis on a conventional 3-axis router.
Staircase elements – newel post and balusters
Staircases have a central pole or support column called a newel. This upright post supports the handrail. Where stairs have a straight flight the newel is the principal post at the bottom of the staircase. With other posts between the bottom and a landing called as balusters the handrail is well supported both structurally as well as decoratively. Sometimes on a landing an intermediate newel is also used. At the top of the staircase a newel is used as a decorative element rather than a structural piece. From the picture below the idea of a newel and balusters can be easily understood for its form and function.
Earlier newels and balusters were hand carved and the process was tedious and time consuming. Importantly no two newels / balusters could be termed as identical. When CNC routers were designed the idea of using the routers as a staircase production machine became obvious. Read more
Cabinet Makers traditionally use a panel saw combined with a manual router, hand drill, point-to-point or any combination of these items to produce cabinets. Well, it is rather easily to get error, and then cause wasting on material and time, increasing lost which should be avoided. Also, sometimes you may find two parts can not […]
What can we do if cnc router does not go back to mechanical origin?
Solutions are
1. If value is changing on software screen, but the machine does not move, please confirm that A. if machine is power on, B. confirm if controlling wire connected well, C, confirm driving motor make alarm, D. Check if 12V or 24V switch power supply is broken.
If one axis of cnc router does not move, do as following step by step:
1. One axis of cnc router does not move. Now check the driver for this axis if work normal. The checking way: replace the driver on this axis with another axis, then to see if the other axis can work after mounted on replaced driver of cnc wood router. This way can confirm if there is problem with driver.
One of my customers contact us for asking for help. The cnc router he purchased from OMNI bit stick acrylic powder and can not remove the bits from collet. We told him to use heating tool to melt acrylic firstly, then try to remove bits. Why cnc router cutter stick powder?
Usually, there are two kinds of cutter sticking situation:
When you buy cnc wood router for woodworking, you may need some accessories to assist the cnc wood router work.
Dust collecting system. While processing wood, it is easily to create dust and powder. Dust collecting system could collect dust efficiently for avoding the dust and powder affect environment and employee health, and also protect the machinie transmission covered with dust.
Recently at a friend’s house, I couldn’t help but notice a smart lounge chair that looked like it was made of intricately designed strips and intricate shavings of wood.
Upon asking my friend, I felt a tad out of place when she nonchalantly mentioned that it was a rib chair, designed and engraving with CNC wood router.
Well if my jaw was hanging partially open at the sight of the chair, it now threatened to drop completely to the ground at the mention of the new term she used.
Seeing the perplexed look on my face, her husband came to my rescue, pointing out that the chair was crafted with wood that was cut using CNC or computer numerical control that is similar to a milling machine.
Instead of relying on hand held routing that didn’t allow a great degree of precision, craftsmen are now using the CNC to produce some of the best furniture designs.
While companies and wood workers once frowned upon this technology, claiming it to be an ignominious short cut to the more dignified hand carving, they are embracing this technology as it offers a great more possibilities.